Manual Drum Mixer
Even Mix Drum Mixer
Supporting Sources
manual drum mixer
The need for different types and styles of mixing in a drum can be found throughout the chemical, paint and coating industry.An agitator can mix liquids and solid materials inside of a metal container.
Since there are many ways to agitate fluids in a drum, it is important to get familiar with the different methods that can be used and the different types of drum agitators that exist.
What is a Drum Agitator? - A machine that mixes chemicals in a container (usually metal), called a drum.
How to choose a Drum Agitator: Three Methods to Mix Chemicals in Drums.
This is because it can impact efficiency, safety, and production.
Drum Mixer Types - Spiral mixer: A spiral blade wraps around the drum to slow down mixing, but is easy to clean.
End cap agitators: Create a torque movement on drum to mix thoroughly - Direct drive agitators: are attached to the drum's shaft to directly mix the chemical inside the drum.
Other Things to Consider Before Purchasing a Drum Agitator - Power requirement for optimum performance - Total height of equipment - Volume capacity of container being used Bung mixing in drums is a method to mix materials inside a drum, as well.
They aren't very efficient, can run at high speeds and can cause temperature problems.
These mixers run at high speeds and quite often run a high shear rate due to high speed.
They usually have a small, ineffective blade that turns the material.
Even if the bung mixer is replaced with an agitator the material will still spin at a high rate of speed.
It is important to slow down the process of mixing by using weight loads or chills.
Are there other ways to mix drums? - Multi cone Agitators use multiple cones stacked on top of each other.
Multi cone Agitators work by rotating the container, and then having a spiral-shaped mixing shaft rotate within a few cones to mix chemicals.
End Cap Agitators use an adjustable mixing screw to allow the chemicals to flow from the center of the barrel.
- Side Press Agitator is used in cylindrical drums and has a side press fitting instead of a bung, this allows for a positive seal and easily attached with a mixer shaft.
Pallet Agitator is similar to an end cap-agitator, but uses paddles in place of a mixing screw.
To prevent any leakage, drum bungs require a positive seal.
- Direct drive agitators have the shaft that attaches the mixer directly attached to the drum's rotating axis, which can be helpful in reducing the amount of vibration there is in the system.
A vibratory drum mixer can be used to mix paint, liquid chemicals and other dry materials together.
This drum mixer is made up of a rotating agitator, an eccentricweight, and a coupling device that reduce vibration transfer to the drum.
